Today our goal was to find all the mistakes of our robots and thinking up of solutions for them. We wanted to make sure that we have goals for our robots so that we can be more focused on building and we won't waste too much time planning on what to do. The main purpose of this was too fix most of the problems.
We had to think back on the competition that happened on 1.18.20 and we talked with the other teams. We first talked about what went wrong during the competition for a few minutes. We listed everything that went wrong and then the next half, we talked about how to solve those solutions.
Next time, I will work more on solving these problems and start designing stuff.
Thursday, January 23, 2020
Monday, January 13, 2020
Nathanielle - Louie Coding
Conner and I mostly built the robot and we are almost finished with the hardware. I also messed around with the programming and made the robot be controlled with motion control just for fun and to see how installing code into the robot works. It was relatively easy and now I just got to finish the code while Conner finish the hardware.
Friday, January 10, 2020
Nathanielle - Arm
Today, Conner and I worked on the arm of the robot. It is almost finish meaning that Conner can finish the rest today and then next week, we will focus on coding the robot. We will also connect everything to the main motherboard so that way we can control the motors.
Thursday, January 9, 2020
Nathanielle - AM - Coding
While Conner was focusing on building the robot, I was helping Chris with the coding because it will help us in the future if we know how to code the robot. Chris and I were figuring out how to change the controls of the robot and how to reprogram the buttons.